LG TV Remote Code List and How to Activate [MUDAH]

LG TV Remote Code – therantnation.com. Remote is an important part of television as a tool to adjust shows, volume and so on. However, not a few users experience problems when the remote is lost or damaged.

Instead of buying a new one, you can actually use a universal remote by entering the LG TV remote code. Currently, there are universal remotes like joker and can be used for various types of LG TVs ranging from tubes to LEDs.

As long as the operating system of the device is the same then you can use it instead of the default controller. But before that, make sure you run a number of procedures first to activate the system.

LG Tube TV Remote Code

LG has two types of televisions in general, namely tube and LCD, although the sizes and features are different, the difference in the LG TV remote code is not so significant. Generally even the same because it is produced by the same company. For LG tube TV, the following is the code.

140, 024, 040, 043, 259, 260, 103, 261, 043

LG LED TV Remote Code

Especially for LED televisions, the LG TV remote code is quite simple compared to the tube type, which is as follows.

024 or 14

Read: Latest Panasonic LED TV Remote Code / Tube / Joker / Chunghop

How to Enter LG TV Remote Code

The actual usage procedure is listed in the manual when you buy it for the first time so it’s quite understandable in its entirety. To make it clearer, the following is a description.

Press and hold the button “Set” on the remote until the red indicator light is on.
Enter the three-digit number according to the list above.
Wait for the indicator light to turn off automatically, otherwise press the “Set” return.
Repeat the above steps for another different code.

If the steps above have been carried out, it means that the remote can be used as a whole. Make sure you run all the steps above to enable the controller more optimally, and use the appropriate code to make it work.

Why LG TV Remote Doesn’t Work

There are several reasons why the LG television special controller doesn’t work, the explanation below can at least help you deal with it first before replacing because the damage could be minor.

Code Not Match

The first cause of the system not working is the mismatch of the LG TV remote code entered with the remote. This may be because each code has its own adjustment to the three-digit number.

It is unlikely that the sign corresponds to a single trial. The solution is to make several attempts to get the numbers to match.

Faulty Sensor

If a series of numbers has been used but does not work then the second possibility is damage to the tool sensor. This damage usually occurs because the controller has fallen or has been used for too long.

Before a complete shutdown, this crash is usually characterized by a slow response when you move channels or other features.

Out of Battery

Problems with the battery also often occur, it could be because the power is running out or just loose. You can confirm by temporarily removing the battery, if there is still a response, it means that it is located incorrectly.

It’s different when you have set the location in such a way, but it still doesn’t work, it means that it’s likely that the battery has to be replaced.

LG TV Remote Maintenance Tips

Apart from repairs, it is equally important to keep your remote functional and durable. Unfortunately not many people pay attention to this so that his life is short and often problematic. For that, there are some tips that can be done, namely as follows.

Routine Cleaning

If it is not cleaned for a long time, dust will enter between the remote as a result, the device will easily rust, to short circuit and damage the components in part or even all of them.

Therefore, regular cleaning will prevent long-term damage. Use a dry cloth and clean thoroughly, especially between the buttons where dust is easy to enter.

Regularly Change the Battery

Batteries have a function in storing energy in small amounts. Therefore, if the power on the battery is felt to be slow, it would be better to replace it immediately.

In addition, cleaning the battery regularly is also necessary, including the storage area so that the device does not rust easily. Remember to always clean it with a dry cloth or tissue to reduce moisture.

Read: Latest Toshiba LED / Tube TV Remote Code 2022

Choose a Quality Battery

In general, batteries are used for a long time so it is important to choose a quality one. The higher the quality, the more durable the use, will save more costs than having poor quality for the reason of a lower price.

Use Plastic

What not many people do is wrap the remote in plastic, this step will efficiently protect the device from humidity and dust that can enter.

The cleaning process will also be very easy, where you just need to clean the plastic surface or clean the inside every now and then. This method will maintain the quality of the remote longer.

Pay Attention to Placement

The habit of most people is to place the control device at random, especially on a bed or sofa that is easily crushed or even stepped on. This habit also often makes the tool short-lived because its durability is drastically reduced.

Make special storage such as hangers on the wall, or a table when finished, not only reducing the risk of damage but also loss that usually occurs to users.

Also avoid hitting the remote if it doesn’t work because this will only increase the damage inside.

If the damage occurs or the response is slow, try to find out from some of the causes above for handling. That’s a list of LG TV remote codes, how to activate them and the proper maintenance procedures, hopefully they can be useful tips for you.

MOBA Games